DCImanager: Supported equipment

From ISPWiki
Jump to: navigation, search

DCImanager uses handlers to manage equipment. Following is a complete list of handlers and their description. We are constantly enlarging this list.

Switch handlers

Handler Information Protocols Tested on devices
Brocade FCX(SNMP) It is used for managing Brocade FCX switches SNMPv1/v2c/v3 at your choice Brocade FCX624
Brocade ICX(Mult) It is used for managing Brocade ICX switches. Supports Private VLAN. SNMPv1/v2c/v3 and Telnet. Mult means that you need to provide access by via SNMP and Telnet Brocade ICX6450-48
Cisco Catalyst (SNMP) It is used for managing Cisco Catalyst OS switches SNMPv1/v2c/v3 at your choice Cisco C3560, C2960
Cisco Small Business It is used for managing Cisco Small Business switches SNMPv1/v2c/v3 at your choice Cisco SF-300-24
Cisco C49xx (SNMP) It is used for managing Cisco C49XX switches SNMPv1/v2c/v3 at your choice Cisco C4948
Cisco C45xx (SNMP) It is used for managing Cisco C45xx switches (including Cat 4948) SNMPv1/v2c/v3 at your choice Cisco C4948
D-Link SNMP This type is used for managing D-Link SNMPv1/v2c/v3 D-Link DGS-3100-48
D-Link 3200B SNMP This type is used for managing D-Link SNMPv1/v2c/v3 D-Link DES-3200-28 (Hardware Revision: B1)
D-Link 3200C SNMP This type is used for managing D-Link SNMPv1/v2c/v3 D-Link DES-3200-28 (Hardware Revision: C1)
Zyxel GS2200 It is used for switches Zyxel GS2200 SNMPv1/v2c at your choice Zyxel GS2200-8, GS2200-24
Zyxel XGS L3 Switch It is used for switches Zyxel XGS SNMPv1/v2c at your choice XGS-4728F
HP (SNMP) Is used for HP switches SNMPv1/v2c/v3 HP 2610-48
Juniper (NETCONF) Is used for Juniper swithes NETCONF, SSH EX22xx, EX32xx
SNMP Common Can be used with any switches that can manage SNMP. However, we recommend using the handler that meet all requirements to your device. SNMPv1/v2c/v3 at your choice HP 2610-48, Cisco C35xx, C29xx
SNMP Common V2 Similar to SNMP Common, but provides more advanced functionality. You can use it if SNMP Common cannot collect statistics from your devices. SNMP Common uses OID portIndex от Cisco to index ports when collecting statistics, therefore statistics cannot be collected on a number of devices. New SNMP Common V2 uses standard IfIndex, allowing for statistics collection on most devices. SNMP Common V2 requires IfIndex preservation between re-initializations that is performed with a specific switch command. Please, contact a manufacturer of your device for more information. SNMPv1/v2c/v3 Cisco C35xx
Arista SNMP Common V2 + new functionality: support of VLAN and port speed via Arista Command API. You first need to enable eAPI in the switch configuration. SNMPv1/v2c/v3 DCS-7010T-48-R

PDU handlers

Handler Information Protocols Tested on devices
APC PDU (SNMP) Is used for APC PDUs SNMPv1/v2c/v3 AP7930
ISPSystem Power Switch v1 Is used for ISPSystem PDUs Telnet ISPSystem Power Switch v1
Racktivity PDU (SNMP) Is used for Racktivity PDUs SNMPv1/v2c PM0816-01
Eaton PDU (SNMP) Is used for Eaton PDUs SNMPv1/v2c/v3 Eaton ePDU G3

IPMI handlers

Handler Information Protocols Tested on devices
IPMI v1.5 Is used for IPMI devices through the IPMI v1.5 protocol) IPMI v1.5 SuperMicro IPMI
IPMI v2 Is used for IPMI devices through the IPMI v2 protocol) IPMI v2 iLO 3, iDRAC

Intel AMT handler

Handler Information Protocols Tested on devices
Intel AMT Common Is used for Intel AMT devices through the WS-Management(WS-Man) protocol WS-Management Intel AMT v.7


UPS handlers

Handler Information Protocols Tested on devices
Liberty NX UPS It is used for UPS Emerson Liberty NX with a WEB-card SNMPv1/v2c at your choice Emerson Liberty NX UPS

Router handlers

Handler Information Protocols Tested on devices
Juniper Router (NetConf) Can be used with switches NETCONF, SSH EX9200